OLED Display 0.96" I2C 128x64, SSD1306, yellow/blue

This is easy to use OLED display, 0.96” screen size, 128x64 resolution and SSD1306 driver. You can connect to it via I2C Easy programming on Arduino. You can use Adafruit’s SSD1306 library. To make it easy example project can be downloaded from GitHub. It is PlatformIO project, that mean, it should be easy to compile.

Display has two sections, upper (32 lines) are yellow pixels and lower section with blue pixels. We have also almost identical blue modules.

Specification:

• Driver: SSD1306
• Screen size: 0.96”
• Resolution: 128 x 64 pixels
• Supply voltage: 3 - 5 V
• Module size: 27 x 27 x 3.5 mm

Pinout:

• GND - Ground
• VCC - Supply voltage
• SCL i SDA - I2C signal lines