IP monitoring and control Teracom TCW121B

Multifunctional device for remote monitoring and management. It is an Ethernet based controller, which is managed by WEB interface or SNMP programs. The controller can be used as standalone device or as a part of control and monitoring systems (sends SNMP Traps or emails under certain conditions).

The device utilizes special schematic which support long 1-Wire interface. The both relays can be activated not only manual but also from status of monitored parameters - temperature, humidity, analog voltage and status of digital inputs.

Basic information:

• 10 Mbit Ethernet connectivity;
• Password protected web based configuration and control;
• 2 digital inputs with "logic level" and "dry contact" modes;
• 2 analog inputs with switchable range - 0÷5VDC or 0÷100VDC, hardware switchable;
• 2 relay outputs with NO and NC contacts;
• Long 1-Wire communication interface, which support up to 2 temperature sensors TST1XX or up to 2 temperature/humidity sensors TSH2xx</a>;
• Temperature and humidity monitoring and control;
• Sending SNMP Traps messages under certain conditions;
• Sending E-mail messages under certain conditions;
• MAC Address filtering;
• Remote FTP firmware update.

Detailed info on product page: TCW121B.

TERACOM products are a bit different from our current offering. If You need remote monitoring and control device they could be right fit. Sure You can do similar things with Arduino, but in case You need something working in minutes - here You go! Check all TERACOM products.